Description
PM1060 is a 6 zone paging microphone. They are suitable for small size installations, whether it is located at the rack itself or be installed at remote location.
It has all it needs to be installed in a commercial installation, running on 24V DC, illuminated ring at microphone and zone selection facility. Output level can be set to Mic or Line level with balanced signal for long distance audio broadcast.
FEATURES
- Condensor gooseneck microphone with illuminated ring
- Pre and post announcement 4 tone chime
- Adjustable chime and mic volume with balanced mic / line output level
- Output level selection to mic or line signal to suit the input type of the pre-amplifier mixer
TECHNICAL SPECIFICATIONS
| Power requirement | 24V DC via D9 conn. |
| Power consumption | 150 mA |
| Zone selection | 6 zones with ALL CALL |
| Microphone | Condensor Mic : Cardioid |
| Output impedance | 600 Ohm |
| Output level | 1.2V ( line output) / balanced mic (775 mV) |
| Output dry contact | nil |
| Output controls | Chime and Mic level |
| Audio connections | 1/4" stereo phone jack |
| Switching connection | D15 connector |
| Operating distance | 300m (recommended) |
| Chime | 4 tone up and 4 tone down |
| Indicators | Mic ring, zone switch, ALL CALL |
| Frequency response | 100 - 12 kHz ( +/- 3 dB ; 0 dB out ) |
| S/N ratio | > 60 dB |
| Gooseneck mic length | 400 mm |
| Dimensions (WxHxD) | 150 x 62 x 186 mm (excluding mic) |
| Weight | 800gms |
